Customer Facing Display Settings (Serial)

To define settings for a customer facing display with a serial connection:

Xenial Portal Data Management Ordering Settings Hardware Peripherals

  1. From the Peripheral Type dropdown, select Customer Facing Display.

  2. From the Peripheral Schema dropdown, select Customer Facing Display.

  3. From the Connection Type dropdown, select SERIAL.

  4. Select Continue.

  5. Locate the Peripheral Type section.

    • Set the Active toggle to Active if the device record is available for use at the site.

    • Multi-site users: Select the globe icon located to the right of the field to define values for each site.

  6. Locate the Peripheral Configuration section.

    • In the Peripheral Name field, type a name for the device.

    • In the Welcome/Idle Line 1 field, type a message to welcome customers to the store. This message appears on the first line of the display when the device is idle (i.e. not displaying order information).

    • In the Welcome/Idle Line 2 field, type an extended message for customers (if desired). This message appears on the second line of the display when the device is idle.

    • In the Closed Line 1 field, type a message to indicate the terminal is closed. This message appears on the first line of the display.

    • In the Closed Line 2 field, type an extended message to indicate the terminal is closed (if desired). This message appears on the second line of the display.

  7. Locate the Configuration Set section.

    • Select Add Set to add and define a set of network configuration options.