Menu di configurazione degli strumenti dello Chef [TEST]
I menu di configurazione degli strumenti dello Chef sono disponibili tramite l'icona dell'ingranaggio degli strumenti dello Chef situata nell'angolo inferiore destro della schermata dello Chef.
Sono disponibili i seguenti menu di configurazione degli strumenti Chef:
Impostazioni di base [TEST]
→ → →
Per modificare un'impostazione nel menu di base:
Seleziona le opzioni da modificare.
Per ulteriori informazioni, vedere Dettagli delle impostazioni di base [TEST].
Nella parte inferiore sinistra del pannello, seleziona Salva.
In alternativa, dalla parte inferiore destra del pannello, seleziona Ripristina modifiche per annullare le modifiche.
In basso a destra nella schermata Chef, seleziona l'icona a forma di ingranaggio per uscire dal menu Strumenti Chef.
Dettagli delle impostazioni di base [TEST]
→ → →
Il menu Configurazione di base degli strumenti Chef contiene le seguenti impostazioni:
Impostazioni | Azione |
---|---|
Regione | Seleziona la regione / posizione del sito dal menu a discesa. |
Fuso orario | Seleziona il fuso orario per il sito dal menu a discesa. |
Tipo di temperatura | Seleziona il tipo di temperatura preferito dal menu a discesa. |
Formato data | Seleziona il formato della data dal menu a discesa. |
linguaggio | Seleziona la lingua di visualizzazione dal menu a discesa. |
Tipo di unità di attesa | Seleziona il produttore dell'unità di attesa dal menu a discesa. |
Impostazioni di caricamento manuale della panoramica | Selezionare le impostazioni del piatto di caricamento manuale dal menu a discesa. |
Consenti Pan Swap | L'interruttore indica se sono consentiti gli scambi di pan di unità. L'impostazione predefinita è OFF. Lo scambio di pentole consente al team di cucina di scambiare le posizioni delle pentole conservando le informazioni sulla pentola come il nome dell'articolo, la quantità e il tempo rimanente. |
Volume PHU | Impostare il volume degli avvisi di unità di attesa con il cursore. |
Projection Configurations [TEST]
→ → →
To change a setting on the Projections Menu:
Seleziona le opzioni da modificare.
For more information, see Projection Configuration Settings [TEST].
Nella parte inferiore sinistra del pannello, seleziona Salva.
Alternatively, from the lower-right of the panel, select Default to reset changes.
In basso a destra nella schermata Chef, seleziona l'icona a forma di ingranaggio per uscire dal menu Strumenti Chef.
Projection Configuration Settings [TEST]
→ → →
The Chef Tools Projection Configuration Menu contains the following settings:
Impostazioni | Action |
---|---|
Auto Trending By Sales Data | When enabled, Chef references the previous 2 hours of sales data to adjust projections and account for an increase or decrease in actual sales. The sliders for Maximum Reduction Percentage and Minimum Reduction Percentage determine to what extent the projection is increased or decreased. |
Maximum Reduction Percentage | Adjust the Maximum Reduction Percentage used to adjust the Auto Trending By Sales Data calculation with the slider. This setting influences the decrease in the projection quantity. |
Maximum Increase Percentage | Adjust the Maximum Increase Percentage used to adjust the Auto Trending By Sales Data calculation with the slider. This setting influences the increase in the projection quantity. |
All Ingredients | Increase or decrease the projections of all products with the slider. When used alone, the slider percentage affects all products. |
Per Ingredient | Limit the items that are affected by the All Ingredients slider with the toggle. |
Network Settings Details [TEST]
→ → →
The Chef Network Settings are read only. The following network details are provided:
Category | Setting | Description |
---|---|---|
Network Status | Last Updated | The date the Network Status was last updated. |
IP Address | The IP Address of the Chef device. | |
Netmask | The Netmask of the Chef device. | |
Gateway | The Gateway address of the Chef Device | |
DNS | The DNS server address used by the Chef device. | |
MAC Address | The MAC address of the Chef device. | |
Portal Connection | ||
Connection Status | Displays Active/Inactive status. | |
Internet Connection | ||
Connection Status | Displays Active/Inactive status. | |
Manual Configuration | ||
Toggle | Set toggle to manually configure network settings |
System [TEST]
→ → →
Chef Tools Configuration System displays the connectivity status of Ethernet-capable kitchen devices. If a device is not Ethernet-capable, the connection status reads as No network installed.
Reload UI [TEST]
→ → →
From the lower-right of the System menu, select Reload UI to reload the Chef browser.
Touchscreen Calibration [TEST]
→ → →
To calibrate the touchscreen:
From the lower-right of the System menu, select Start Touchscreen Calibration.
A gray screen appears with a red crosshair in the upper-left. Touch the center of the crosshair.
The crosshair turns white when a touch is registered.
Touch the center of the red crosshair as it appears in the remaining three corners of the screen.
The System menu appears once calibration is completed.
Nota
If a crosshair touch is not registered, the calibration process starts over, with the red crosshair appearing in the upper-left.