Skip to main content

Upgrade Through the Chef Device

Chef Chef Tools Advanced

Non network-capable devices are required to follow this firmware upgrade method.

Before upgrading, have the following on hand:

  • Chef device

  • Internet connection

  • An 8GB USB drive, FAT32 format

Before upgrading, gather the following Holding Unit information:

  • Manufacturer

  • Model

  • Size Configuration

To upgrade through the Chef device:

  1. From the Chef device, on the lower-right, select the Chef Tools gear.

  2. From across the top of the Chef Tools menu, select Advanced.

  3. Insert the USB drive into the Chef device.

  4. From the Advanced panel, under PHU Firmware, select Create PHU FW Package on USB Key.

  5. From the Create PHU Firmware Update on USB Drive window, use the designated dropdown to select the following:

    • Manufacturer

    • Model

    • Hardware Version

    • Firmware Type

    • Path of the USB Drive*

  6. From the bottom of the Create PHU Firmware Update on USB Drive window, select Start.

    • Alternatively, select Cancel to exit the process.

  7. Review the request to format the drive, then select Yes.

    • Alternatively, select No to exit the process.

  8. Wait as the drive is formatted and the upgrade files transfer to the USB drive.

  9. Review the confirmation message about the creation of the upgrade files, then select Ok.

  10. From the Chef device, remove the USB drive.

  11. Refer to the manufacturer-provided manual for instructions to upgrade the holding unit via a USB drive.

  12. Repeat Passo 3 thru Passo 11 for each holding unit.

  13. From the Chef device, on the lower-right, select the Chef Tools gear.

  14. From the Chef Tools menu, select Overview to exit to the Chef Main Screen.

*If the USB Drive is not recognized, reseat the drive and select Reload.