Printer (LAN)
→ → → →
To define settings for a printer with a LAN connection:
From the upper-right of the Peripherals area, select New Peripheral.
From the Peripheral Type dropdown, select Printer.
From the Peripheral Schema dropdown, select Printer.
From the Connection Type dropdown, select LAN.
Select Continue.
General
From the menu pane on the left, select General.
Locate the Peripheral Type section.
Toggle Active to Active if the device is available for use at the site.
Multi-site users: To the right of the field, select the globe icon to define values for each site.
Locate the Peripheral Configuration section.
Define the following settings:
Field
Description
Peripheral Name
Type a name for the device.
Printer Type
From the dropdown, select the type of printer: Receipt Printer or Kitchen Printer.
Vendor
From the dropdown, select the vendor for the device.
Model
From the dropdown, select the device model.
Cutting Option
From the dropdown, select the method to cut the printer paper:
Full Cut - Cut the paper fully and detach it from the roll.
Partial Cut - Cut the paper partially to enable the user to pull it from the roll.
Tear Bar - The operator detaches the paper from the roll using the physical tear bar attached to the printer.
Label Printer
Toggle Yes if the printer has the capability to print sticky (adhesive) labels.
Locate the Connection Configuration section.
Define the following settings:
Field
Description
IP
Type the IP address of the device.
Port
Type the port number that is used to connect to the device.
Printer Options
To define the Printer Options:
From the menu pane on the left, select Printer Options.
Define the options in the following sections:
Section
Description
Print Template
Select the formatting template for print jobs.
To add a print template set:
Select Add Set.
From the Print Template Set Options window, select +Add Template.
From the Print Templates dropdown, select the template.
Backup Printers
Select the backup printers to use in the event this printer is unavailable.
To add a set of backup printers:
Select Add Set.
From the Backup Printer Set Options window, select +Add Backup Printer.
From the Backup Printer dropdown, select the printer.
Add additional printers as needed.
Select and drag the control to the left of the listed printers to sort them in the desired sequence.
Preferred Terminal Assignment
Select the POS terminals to associate with this printer.
To add a POS terminal set:
Select Add Set.
From the Preferred Terminal Assignment Set Options window, select Add Preferred Terminal.
From the Preferred Terminal dropdown, select the terminal.
Add additional terminals as needed.
Select and drag the control to the left of the listed terminals to sort them in the desired sequence.
Select Save & Close.
Filters
Huomaa
The following settings are only available for Kitchen Printers.
From the Filters page of the Peripherals editor, define filters to determine the type of items to print from this printer:
From the menu pane on the left, select Filters.
From the Filters page, locate the Filters section.
From the Configuration Type dropdown, select the desired filter configuration type:
Basic Filter
The following describes how to define basic item filters for the kitchen printer using the following forms:
Routing Categories
Table Tags
Destinations
Order Sources
Item Sources
Routing Categories
Only order items that are assigned to the identified kitchen routing categories are printed. If no routing categories are identified, all order items are printed regardless of the assigned routing categories.
To filter items by routing category:
From the Filters page, locate the Routing Categories section.
Toggle Enable to Yes to enable the filter.
Select Add Routing Categories.
From the Routing Categories Set Options window, select the applicable routing categories.
From the lower-right of the Routing Categories Set Options window, select Save & Close.
Table Tags
Only order items that are associated with tables that are assigned the identified Table Tags are printed. If no Table Tags are identified, all order items are printed regardless of the associated table.
To filter items by Table Tag:
Locate the Table Tags section.
Toggle Enable to Yes to enable the filter.
Select Add Table Tags.
From the Add Table Tags window, select the applicable Table Tags.
From the lower-right of the Add Table Tags window, select Add # Table Tags.
Destinations
Only order items with the identified order destination are routed to the kitchen printer. If no order destinations are identified, all items are routed to the printer regardless of the order destination.
To filter items by the order destination:
Locate the Destinations section.
Toggle Enable to Yes to enable the filter.
Select Add Destinations.
From the Add Destinations window, select the applicable order destination(s).
From the lower-right of the Add Destinations window, select Add # Destinations.
Order Sources
Only order items from the identified order sources are printed. If no order sources are identified, all items are printed regardless of the associated order source.
To filter items by order source (e.g. Mobile App, Web Site, POS terminal):
Locate the Order Sources section.
Toggle Enable to Yes to enable the filter.
Select Add Order Sources.
From the Add Order Sources window, select the applicable order sources.
From the lower-right of the Add Order Sources window, select Add # Order Sources.
Item Sources
Only order items that are associated with the identified Item Sources are printed. If no Item Sources are identified, all items are printed regardless of the associated Item Source.
To filter items by Item Source:
Locate the Item Sources section.
Toggle Enable to Yes to enable the filter.
Select Add Item Sources.
From the Add Item Sources window, select the applicable Item Sources.
From the lower-right of the Add Item Sources window, select Add # Item Sources.
Advanced Filter
To define an advanced item filter:
From the Add Condition dropdown, select the desired property to filter.
From the second dropdown, select the applicable condition for the selected property: Is OR Is Not.
From the Select Condition Value dropdown, select the specific property value to filter.
Select ADD.
Use the AND, OR, and () controls to the right of the ADD button to define relationships between multiple item filters.
Advanced filter examples:
Example | Description |
---|---|
Table Tag Is SectionA AND Destinations Is Carry Out | Only items entered for tables with the tag SectionA with an order destination of Carry Out. |
Routing Categories Is Burgers OR Item Source Is Mobile | Only items with an assigned routing category of Burgers or items with the Item Source of Mobile. |
Order Sources Is Not Mobile App AND Destination Is Not Dine In | Items from any order source other than Mobile App that have been assigned any order destination other than Dine In will print. |