Advanced
→ → →
Tipp
The Chef Tools Gear is found in the lower-right of the Chef screen.
The options in the Tools Menu include: Overview, Build Cards, and Configuration.
The Advanced tab is used to manage the connectivity of any number of devices at a site.
Field Name | Description |
|---|---|
Serial Device Count | The number of serial devices that the Chef controls |
Port | The physical port on the Chef for connecting devices |
Protocol | Instructs Chef how to communicate with a connected device. The current available protocols are:
|
Warmer(s) | Connected devices control up to 3 warmers to prepare a specific type of product (burgers, speciality, etc.) |
Vendor | The brand name of the POS vendor sending sales information to Chef |
IP | The LAN IP address of the POS database that retrieves sales information |
Save | Saves the current configuration settings |
Force Bar Update | This feature is reserved for future use |
Updating PHU Firmware
Anmerkung
The manufacturer, model, and hardware version of the PHU is required in order to update the firmware.
Locate one of the USB ports on the bottom of the Chef unit.
Plug in a USB device to the port.
In the respective fields, type the make and model of the PHU.
The latest firmware version of the PHU downloads to the USB.
Configuring the USB to Update PHU Firmware
Anmerkung
Previous data on the USB drive will be erased during this process.
In one of the USB ports on the bottom of the Chef unit, plug in a USB drive
In the lower right corner of the screen, select the tool menu, then select Configuration utilities
Select the Advanced tab
In the PHU firmware section, select the button labeled Create PHU Firmware update on USB device
In the pop-up window, select from a list of available PHU firmware updates for to following:
Manufacturer
Model
Hardware version
Firmware type
Path of your USB drive
Anmerkung
A error displays if there was no USB drive inserted or the USB drive was not detected. If this happens, plug in a USB and press the reload button.
In the lower right of the screen, select the Start button
Acknowledge the confirmation, select Yes to continue
Wait for the firmware to update
Acknowledge completion and remove USB
The USB drive is now ready to update the PHU